I&C and Electrical Technician - Pueblo, CO

Employer: Amentum

Job Description:
SURETY -

This position is designated as a chemical duty position and is subject to the requirements of the Chemical Personnel Reliability Program.  As a condition of employment, candidates and incumbents must favorably complete a personnel security investigation, urinalysis testing, medical exam and respiratory screening, and must meet and maintain personnel suitability and reliability requirements established by Army Regulation 50-6.

This position includes a competitive benefits package, including health, dental, and vision, paid leave and holidays, and 401k contributions. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our careers site: www.amentumcareers.com

This position includes participation in the PCAPP Employee Retention Incentive Benefit Plan, which provides a financial incentive encouraging personnel to remain employed by Amentum at the PCAPP project through a specified timeframe provided qualifiers are met. 


I&C TECHNICIAN

MAJOR RESPONSIBILITIES / DUTIES / TASKS
Perform all work safely and with the utmost concern for the safety of self and other employees.
Perform all work in compliance with environmental permits and regulations.
Be at work when scheduled and maintain a good attendance record.
Perform a variety of instrumentation, controls/electronics and electrical trade functions including modifications and revisions, corrective and preventive maintenance on facility systems, equipment and components such as instrumentation, control circuits, pressure indicators and temperature indicators, programmable logic controllers, motor control centers, motors, HVAC units and control and power circuits involved in the installation of conduit, cable trays, raceways, wiring and other associated electrical equipment in support of plant configuration changes.
Perform journeyman level duties in the installation, repair and maintenance of low voltage (≤ 120 volts) electrical equipment, systems and components. I&C Technicians may perform Electrical LO/TO zero energy verifications on 480 volt electrical equipment, after completion of NFPA 70 Qualified Person Training.
With verified PCAPP certification as an Electrical Technician, perform corrective and preventative maintenance of facility electrical systems, equipment, and components such as generators, switchgear up to 13.2kv, transformers, programmable logic controllers, motors, HVAC units, control and power circuits.
Perform emergency repairs to systems, equipment and components. Record the as-found condition as well as the repaired condition, analyzing system characteristics to determine the cause of failure.
Conduct post-maintenance testing of systems, equipment and components as necessary to complete work packages and ensure systems, equipment and components are returned to operational conditions.
Assist vendors and provide technical support in performing electrical maintenance tasks that are beyond the department's capability.
Maintain accountability of property, including tools and maintenance equipment.
Understand and utilize a variety of hand tools, power tools, measurement and test equipment (M&TE) in the performance of duties.
Follow predetermined checklist in the performance of preventative maintenance of facility equipment and systems.
Assure code and building standards are met.
When assigned to the SDC, may perform munitions handling and or transport duties through use of forklift, list assist devices or via electric utility vehicles.

This job description outlines the principal duties and in no way states or implies these are the only duties to be performed in this position.

Compensation
STARTING RATE:  $29.31 - $40.52     (This position is part of a certification pay program, which provides additional pay increases as necessary training and certifications are completed.  On average, a minimum of two pay increases would be obtained within the first six months of employment.)

Basic Qualifications:

High school diploma/equivalent and 6 years industrial maintenance experience.

 
         Or, Completion of formal apprenticeship or similar accredited training program (such as vocational, trade,                     commercial, or military) in the I & C field and 2+ years industrial maintenance experience.

 

Must be a US Citizen or naturalized citizen able to obtain and maintain PCAPP site access.
Must be computer literate in common software applications and able to operate general office equipment.
Must be 18 years of age or older.
Must be willing to work overtime, varying hours and/or rotating shifts.
Must be willing and able to work in an industrial environment that is in close proximity to and/or in a chemical demilitarization facility.



         Minimum Qualifications:

Must have experience working with low voltage (≤ 120 volts) electrical equipment, systems and components.
Must be able to read and interpret blueprints, drawings, layout and specifications in the performance of the duties to ensure system integrity is maintained.
Must have thorough understanding of instrumentation equipment (transmitters, smart valves, etc.) operation of that equipment. Also instrumentation equipment maintenance requirements and restrictions imposed by safety and environmental regulations.
Demonstrate competency in analog and digital process control loop and instrument maintenance repair and troubleshooting by use of Multi-meters and Fluke 744 Calibrators.
Sound fundamentals in the use of measuring and testing equipment consistent with I/C scope of work.


Desired Qualifications:

Experience in start-up of facilities process instrumentation
Experience in a toxic or hazardous materials work environment




ELECTRICAL TECHNICIAN
MAJOR RESPONSIBILITIES / DUTIES / TASKS
 
·         Perform all work safely and with the utmost concern for the safety of self and other employees.
·         Perform all work in compliance with environmental permits and regulations.
·         Be at work when scheduled and maintain a good attendance record.
·         Verify the installation conduit, cable trays, raceways, wiring and other associated electrical equipment in support of plant configuration.
·         Follow predetermined checklist in the performance of preventative maintenance of facility equipment and systems.
·         Maintain accountability of property, including tools and maintenance equipment.
·         Understand and utilize a variety of hand tools, power tools, measurement and test equipment (M&TE) in the performance of duties.
·         Develop technical solutions to maintenance related problems; minimizing cost and schedule impact.  Requires communication of technical information to management, peers and subordinates so safe and environmentally sound operations are not compromised.
·         Proficient in CMMS for job related applications.
·         Assure code and building standards are met.
·         When assigned to the SDC, may perform munitions handling and or transport duties through use of forklift, list assist devices or via electric utility vehicles.


REQUIREMENTS / SPECIFICATIONS

Basic Qualifications:

·         High school diploma/equivalent and 6 years industrial maintenance experience.

Or, Completion of formal apprenticeship or similar accredited training program (such as vocational, trade, commercial or military) in the electrical/electronic field or journeyman certification and 4 years industrial maintenance experience.

Must be a US Citizen or naturalized citizen able to obtain and maintain PCAPP site access.
Must be computer literate in common software applications and able to operate general office equipment.
Must be 18 years of age or older.
Must be willing to work overtime, varying hours and/or rotating shifts.
Must be willing and able to work in an industrial environment that is in close proximity to and/or in a chemical demilitarization facility.
 

Minimum Qualifications:

Must have thorough understanding of electrical equipment operation and maintenance.
Must be able to use common electrical hand tools such as screw drivers, pliers, strippers, knives, drill motors, and test equipment.
Must have experience working with high voltage (480v-13.2kv).
Able to read and interpret blueprints, drawings, layouts and specifications in performing duties to ensure system integrity is maintained.
Experience with electrical safety equipment and PPE.
Experience in performing corrective and preventative maintenance of facility electrical systems, equipment and components such as generators, switchgear, transformers, programmable logic controller, motors, HVAC units, control and power circuits.


Desired Qualifications:

Experience working in a toxic/hazardous materials environment
Journeyman electrician license
Compensation


STARTING RATE:  $28.45 -  $39.33    (This position is part of a certification pay program, which provides additional pay increases as necessary training and certifications are completed.  On average, a minimum of two pay increases would be obtained within the first six months of employment.)

 

Contact Person: Leslie Baumgartner
Phone: 719-948-0647
Email: Leslie.Baumgartner@amentum.com
Location: Pueblo, CO
Application Method: Email
Base Pay: 28.45

Posted on June 30, 2021

©2021 Perry Technical Institute Careers at Perry Tech Contact Policies

Home

2011 W. Washington Ave Yakima, WA 98903 USA 509-453-0374